Infrastructure admin and infrastructure viewer users can view the migration zones that are connected to this storage
pool as well as the storage block hardware information.
Complete the following steps to view storage pool resources
and connectivity.
- Log in to the ThinkAgile CP Cloud Controller as an infrastructure admin or infrastructure
viewer user.
- In the ThinkAgile CP Cloud Controller, complete one of the following steps:
On the Dashboard page, scroll down to the list of storage pools
and, for the storage pool for which you want to view details, click Properties.
Figure 1. Storage pool properties on Dashboard
In the left navigation menu under Storage Pools, click the
storage pool for which you want to view details.
Figure 2. Select storage pool from navigation menu
- Click the Resources & Connectivity tab
Figure 3. Resources and Connectivity tab
Connected Migration Zones
The Connected
Migration Zones section shows which migration zones are connected.
Storage Blocks
The Storage Blocks section
shows the following information.
- Storage Block. The name of the storage block (hardware
resource) assigned to this storage pool.
- Physical Capacity. The usable and used physical capacity
of the storage block (after accounting for the storage redundancy
overhead).
- Virtual Capacity. The projected virtual capacity available
for use as well as the currently used virtual capacity of the storage
block.
- Virtual IP. The virtual IP addresses associated with the
storage block.
- Controller 1. The current status of the storage controller
as Active, Passive, or Offline.
- Controller 2. The current status of the second storage
controller as Active, Passive, or Offline.
Click Add storage blocks to add
any unassigned storage blocks to the storage pool.