ThinkAgile CP4000 series overview

The Lenovo ThinkAgile CP4000 series scales as an initial data-management footprint for managed service provider and cloud service provider environments that start on a smaller scale but are poised for growth. The CP4000 series also supports business continuity when deployed remotely as an off-site backup for disaster recovery.

The Lenovo ThinkAgile CP4000 series consists of the following components:

Storage block


Image showing ThinkAgile CP4000 Series Storage Block front and rear views
  • 1 Storage Block (SB-S10)

  • Dual controller - single CPU per controller

  • 8x SFP Base-T SFP+ transceivers

  • 8x CAT6 cables, 1.5m and other lengths permitted

  • 2x CAT5e cables, 1.5m and other lengths permitted

  • 32 GB RAM per controller

  • 8, 16, 24 drives (8 drives per drive pack)

  • 800 GB, 1.6 TB NVMe drives per controller

  • Drives must be consistent within a storage block

  • Dimensions: 87.6 x 446.4 x 857.2 mm (3.4 x 17.6 x 33.7 inches)

  • Maximum weight: 42.0 kg (92.6 lb)

Compute block


Image showing ThinkAgile CP4000 Series Compute Block front and rear views
  • 1 D2 enclosure, fully populated PSU, fan, 220V with 10Gb SFP+ network module

  • Minimum 2 SD530 nodes, maximum 4 nodes

  • 128 GB, 256 GB RAM per node

  • 8+ cores per CPU, 1-2 sockets filled AXQT, and others

  • 2x SFP+ DAC cables per node, 1.5m and other lengths permitted

  • Boot: 1x SATA 240 GB

  • Dimensions: 41.0 x 562.0 x 222.0 mm (1.7 x 22.2 x 8.8 inches)

  • Maximum weight: 55 kg (121.2 lb)

Interconnect switch


Image showing ThinkAgile CP4000 Series Interconnect switch
  • 1 or 2 CP-I-10 interconnect switches

  • 48x 10 Gb SFP+ fabric ports

  • 6x 40 Gb QSFP+ fabric ports

  • Dimensions: 438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71 inches)

  • Maximum weight: 8.95 kg (19.73 lb), with two installed PSUs

Management switch

Lenovo ThinkSystem NE0152T RackSwitch


Image showing Lenovo ThinkSystem NE0152T RackSwitch for ThinkAgile CP4000 Series
Note:

A dedicated out-of-band (OOB) management switch is required for this solution. If the Lenovo NE0152T is not used, you must provide an OOB management switch with the correct configuration.

Services

Lenovo Deployment Services are mandatory

Lenovo Hardware Installation Service is optional

Software

Software is preloaded on compute, storage, and switch.