Configure migration defaults

You need to set the ThinkAgile CP migration default settings, which includes defining the location for the target VMs.

  1. Click Settings in the top navigation bar.
    Figure 1. Migration Manager menu - Settings

  2. On the Settings page, click ThinkAgile CP Migration Defaults.
    Figure 2. Migration Manager Settings

    The Change ThinkAgile CP Migration Defaults page opens.

    Figure 3. Change ThinkAgile CP Migration Defaults page

  3. On the Change ThinkAgile CP Migration Defaults page, define the following settings:
    • Network – Select the network for this migration.

    • Data Center – Select the target data center for the migrated VMs.

    • Migration Zone – Select the target migration zone for the migrated VMs.

    • Storage Pool – Select the target storage pool for the migrated VMs.

    • Application Group – Select the application group for the migrated VMs, if needed.

  4. Click Save.