Configure 1 Gbps Link Speed in the ThinkAgile CP Cloud Controller

This section covers the procedure to configure a 1 Gbps link speed in the Cloud Controller.

The ThinkAgile CP Cloud Controller is designed to use a 10 Gbps link speed. If your network only supports 1 Gbps, log into the Cloud Controller on the interconnect switch and run these commands to configure 1 Gbps link speed on Ethernet port 48:

$ cli> configure# set interface gigabit-ethernet te-1/1/48 speed 1000# commit# exit> exit

Graphic of command prompt showing the commands to run on the interconnect switch