Configure Service and Support Settings task

Procedure for configuring service and support settings as part of XClarity Administrator initial setup.

  1. In the Initial Setup window, click the Configure Service and Support Settings task. The Service and Support page displays.
  2. On the Usage Data tab, select the option you prefer, and click Apply.
    Figure 1. Service and Support Usage Data tab
    Screenshot of the Service and Support Usage Data tab
  3. On the Call Home Configuration tab, scroll to the bottom of the page if necessary and select Skip Step (the Call Home feature is not used for ThinkAgile SXM).
    Figure 2. Service and Support Call Home Configuration tab
    Screenshot of Service and Support Call Home Configuration tab
  4. On the Lenovo Upload Facility tab, scroll to the bottom of the page and click Skip Step.
    Figure 3. Service and Support Lenovo Upload Facility tab
    Screenshot of Service and Support Lenovo Upload Facility tab
  5. On the Warranty tab, ensure that all three drop-down lists are set to Disabled, and then click Apply.
    Figure 4. Service and Support Warranty tab
    Screenshot of Service and Support Warranty tab
  6. Click Close in the Success window that displays, and click Return to Initial Setup in the left navigation pane.
  7. On the Service Recovery Password tab, enter and confirm a password for XClarity Administrator recovery, and click Apply. Record this password for future reference.
    Figure 5. Service Recovery Password page
    Screenshot of the Service Recovery Password page
  8. Click Close in the Success window that displays, and then click Return to initial setup.
Proceed to the Configure Additional Security Settings task.